Windows adk for 21h2
When you use a Windows based boot image with an OS deployment task sequence that includes the Pre-provision BitLocker step, the step might fail. You’ll see errors similar to the following strings in the smsts.
Run the following command:. For more information on this registry key, see Change the TPM owner password. Supported OS versions for clients. That way it will get copied to your client when running the task sequence. Add those two command lines before the Sysprep step. I added them in my State Restore section of the task sequence. MDT can be installed either on a file server, or on your own laptop, but in this scenario, I use a file server named MDT The entire process for creating a Windows 10 image using MDT takes about 20 — 30 minutes, fully automated.
This guide covers the following seven steps:. Copy the x86 version of the new Microsoft. Replace the existing file. Copy the x64 version of the new Microsoft. Options: default.
Once the deployment share is created you also want to relax the security a bit. MDT locks it down to hard by default. Note: Make sure to always download the latest version of Windows 10 Enterprise 21H2. Microsoft releases new media monthly. On my server it was mounted to the D: drive. Note: The Windows 10 media comes with many Windows version, in the below example I simply removed all but the Enterprise version, and gave it a better name.
Using an elevated Command prompt , download the installers by running the following command: setup. Right-click the Microsoft folder, and select New Application. Use the following settings for the New Application Wizard :. Find information on known issues and the status of the rollout for Windows 10, version 21H2. Looking for a specific issue? Want the latest Windows release health updates? Follow WindowsUpdate on Twitter.
The Windows release health hub is always evolving. Take our short survey and let us know how we can improve. After installing KB , some Windows devices might start up to an error 0xca with a blue screen.
Technical note: After installing KB , there might be a mismatch between the file versions of hidparse. Workaround: To mitigate this issue on devices already experiencing it, you will need to use Windows Recovery Environment WinRE with the following steps:.
Important: It is not recommended to follow any other workaround than those recommended above. We do not recommend deleting the hidparse. Next steps: We are working on a resolution and will provide an update in an upcoming release. After installing updates released September 20, or later, taskbar elements might flicker and cause system instability.
Symptoms might include:. Restarting the devices can alleviate the issue in some cases, but possibly not all. MDT01 is a domain member server in contoso. HV01 is a Hyper-V host computer that is used to build a Windows 10 reference image. PC : A computer running Windows 10 Enterprise x64, fully patched with the latest security updates, and configured as a member in the contoso. PC : A computer running Windows 7 SP1 Enterprise x64, fully patched with the latest security updates, and configured as a member in the contoso.
This computer is referenced during the migration scenarios. The device names are incremented for clarity within each scenario.
If you use a computer with a single system partition C: , you’ll need to adjust some procedures in this guide to specify the C: drive instead of the D: drive. For instructions on how to enable Hyper-V on Windows 10, see the Verify support and install Hyper-V section in the Windows 10 deployment test lab guide. This guide is a proof-of-concept guide that has detailed instructions for installing Hyper-V. All server and client computers referenced in this guide are on the same subnet.
This isn’t required, but each server and client computer must be able to connect to each other to share files, and to resolve all DNS names and Active Directory information for the contoso.
Internet connectivity is also required to download OS and application updates.
ADK download for Windows 10 – Microsoft Support.Prepare for deployment with MDT
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support. For more information, see the following articles:. Infrastructure requirements for OS deployment. Download the Windows ADK. Windows PE is a separate installer. The following table lists the versions of the Windows ADK that you can use with different versions of Configuration Manager. Configuration Manager supports the use of older versions of Windows PE as boot images, but you can’t customize them in the Configuration Manager console.
For more information, see Customize boot images with Configuration Manager. When you use a Windows based boot image with an OS deployment task sequence that includes the Pre-provision BitLocker step, the step might fail.
You’ll see errors similar to the following strings in the smsts. Run the following command:. For more information on this registry key, see Change the TPM owner password.
Supported OS versions for clients. Skip to main content. This browser is no longer supported. Table of contents Exit focus mode. Table of contents. Important Windows PE is a separate installer. Submit and view feedback for This product This page. View all page feedback. Additional resources In this article.
We’ll document any known issues or caveats.